Machines
-
Continue Reading
Vaccum Pump
Heavy Duty Vacuum Pump is Equipped with:
- High Speed Rotor
- Oil Level Indicator
- Oil Input / Outlet Bolt
- Silencer
Technical Specification :
MODEL 
TICO/ VPUMP / 1
TICO/ VPUMP / 2
Chamber Size 2 Liter 3 Liter Required Supply ‘V’ 230 V 230 V Power Consumption (motor) ‘w’ 390 watts 390 watts Phase (motor) Single Single Dimension (L x W x H) 6½” x 8½” x 27” 9” x 8½” x 27” -
Continue Reading
Centrifugal Casting Machine With Dimmer
This machine is equipped with Extra Long Arm with Heavy Duty spring insures denser, Porosity-Free Casting . Will accept flasks upto 5” x 6”.With the In-Built Furnace metal can be melted directly into the machine. This Spring-Driven Unit will begin to decelerate as soon as they are released,
Centrifugal Metal Casting Machine is Equipped with:
- Dimmer(Auto Transformer)
- Volt & Ampere Meter
- Pilot Light (LED)
Technical Specification :
MODEL TICO / CENTRI Capacity (Gold) 240 Gms Maximum Temperature 1200°C / 2192°F Required Supply ‘V’ 230 Power Consumption ‘W’ 1000 Phase Single Weight 14.8 kg (without dimmer) Dimension (L x W x H) 25½” x 7” x 10½” -
Continue Reading
Vulcanizing Press
This Sturdy well-made unit features Microprocessor Based Digital PID Temperature for maximum accuracy and proper operation. PID Temperature Memorize the Temperature you set until you reset it & Lets you know when the vulcanizer has reached the set temperature and is ready to use. Temperature is accurately maintained in °C with the & the built–in 1-hour timer automatically shuts off the vulcanizer at the end of the cycle.
Heavy Duty alignment guides for even pressure ,Heavy duty guide post and 3/4” diameter pressure screw to assure perfect alignment of both platens. Steel Platens and Guide Rods are chrome plated to Prevent Corrosion. Frame is made of Graded Cast iron and base is predrilled for easy mounting.
Technical Specifications and Features :
MODEL 
TICO / PRESS / 1
TICO / PRESS / 2
TICO / PRESS / 3
On / Off Switch Yes Timer (German Made) Yes PID Temperature Controller Yes Yes Heating Plate 5” x 7½” 5” x 7½” 5” x 7½” Max. Temparature 300 °C / 572 °F 300 °C / 572 °F 300 °C / 572 °F Required Supply ‘V’ 230 Volts 230 Volts 230 Volts Power Consumption ‘w’ 600 watts 600 watts 600 watts Phase Single Single Single Weight 26.3 kg 26.4 kg 26.4 kg Dimension (L x W x H) 8” x 13½” x 17½” 8” x 13½” x 17½” 8” x 13½” x 17½” -
Continue Reading
Vacuum Casting Machine (2 In 1)
TICO / VACAST
This Versatile unit allows you to invest your flasks under vacuum on the left side of the machine and Vacuum Cast both Perforated and Standard Flasks on the Right Side. When the Control Handle is turned to ‘left’. The powerful vacuum pump (included) pulls air bubbles from the investment under a bell jar. Turning the Control Handle to ‘Right” redirects the vacuum on Casting Side.The use of Perforated Flasks in the casting chamber allows vacuum to be pulled from both the bottom and sides of the flasks assuring a complete fill and denser castings.
Heavy Duty Vacuum Investment & Casting Machine is Equipped with:
- Pyrometer
- ½” HP motor
- On/Off Switch
- Air Valve
Technical Specification :
MODEL TICO / VACAST Required Supply ‘V’ 230 Power Consumption ‘w’ 390 Watt (motor) Phase Single Weight 80 kg Dimension (L x W x H) 16” x 30” x 39” -
Continue Reading
Vaccum Machine
TICO / VACUUM
This Machine is designed for vacuuming investment in a production environment. Large capacity unit for investing multiple flasks. Features a substantial 14” x 14” Heavy Aluminum jiggle plate with rubber pad to accommodate large bell jar.
A 1/2” HP Motor & a Powerful 2 HP Vacuum pump are included. Vacuum intake valve is raised so investment will not obstruct valve. Totally enclosed steel cabinet with Bolted Door.
Heavy Duty Vacuum Machine is Equipped with:
- Pressure Gauge
- ½” HP Motor
- On/Off Switch
- Air Valve
Technical Specification :
MODEL TICO / VACUUM Required Supply ‘V’ 230 Power Consumption ‘w’ 390 (motor) Phase Single Weight 70 kg Dimension (L x W x H) 16” x 23¾” x 40” -
Continue Reading
Wax Injectors
A Sturdy Yet Compact & Extremely Well Built units designed for reliability & performance. Features Includes Twin heated sealed nozzle which won`t leak or clog, easy to remove and tightly sealed top , Fully insulated Steel chamber, Adjustable pressure control with regulator & gauge. Adjustable Switch / PID Temperature Controller upto 100°C ,Power Indicator Light.
Air Pressure Wax Injector Machine is Equipped with :
- Microprocessor Based Digital PID Temperature Controller
- Air Regulator
- Pressure Gauge
- Twin Nozzle
Technical Specification :
Model 
TICO-INJECT-1
TICO-INJECT-2
TICO-INJECT-3
Pressure Control With Microprocessor Based Digital PID Temperature Controller With Analogue Meter With Analogue Meter Air Pressure Method Air Compressor with ¼” HP Motor (Considered as an extra accessory) Air Compressor with ¼” HP Motor (Considered as an extra accessory) Foot Pump Wax Capacity 2 Kg 2 Kg 2 Kg Maximum Temperature 100°C / 212°F 100°C / 212°F 100°C / 212°F Required Supply ‘V’ 230 V 230 V 230 V Power Consumption ‘W’ 500 watts 500 watts 500 watts Motor (compressor) 180 watts 180 watts 180 watts Phase Single Single Single Weight 18.5 kg 18.5 kg 18.5 kg Dimension (L x W x H) 8” x 8” x 17” 8” x 8” x 17” 8” x 8” x 17”
